User`s manual

Chapter 9 - Print Modes and Printer Information
124
FastRIP 10.0 User’s Manual
monly held belief an elliptical dot was better, you might find that, with an inkjet printer, round
is a better dot shape choice.
When printing halftone dots on or next to halftone dots, optical patterns can form called “Moiré
Patterns.” ese patterns look like checker boards and are not desirable. To minimize Moiré
Patterns, use a halftone angle of 25 degrees for all screens on photorealistic jobs. is is called
“Simulated Process Color.” For normal CMYK Process Color, try angles of Cyan 15, Magenta
45, Yellow 75 and Black 75 (Yes, the Black and Yellow are the same angles.)
eP s o n 7600/7800/7880 – Fa s t RIP Xl a n d
eP s o n 9600/9800/9880 – Fa s t RIP lF
FastRIP XL version 10.0 supports:
PostScript Level 3 Images `
Printing up to 24” in width and length `
Left and Right borderless bleed printing on certain page sizes `
FastRIP LF version 10.0 supports:
PostScript Level 3 Images `
Printing up to 44” in width and length `
Left and Right borderless bleed printing on certain page sizes `
e EPSON Stylus Pro 7880 and EPSON Stylus Pro 9880 are Professional Wide Format print-
ers. Before setting up FastRIP, read the applicable Printer Guide for Print Head alignment, paper
loading and printer management instructions.
Sy S t e m re Q u i r e m e n t S
FastRIP XL and LF are a 32-bit Windows application. e following system configurations are
the minimum requirements: