User`s manual

117

Version 1.1 Revised February, 2009

Chapter 9 - Print Modes and Printer Information

re Q u i r e m e n t S

FastRIP is a 32-bit Windows application. e following system conﬁgurations are the minimum

requirements:

A PC equipped with a Pentium processor 1.5 GHz or higher `

512MB of RAM (1 GB or more is highly recommended. User’s of the `

new Windows Vista OS should have 2 GB of RAM for proper function-

ality.)

200MB free hard drive space recommended `

FastRIP Pro will only operate on a Windows Vista/XP/2000 platform `

USB 1.1 port (high speed 2.0 recommended) `

pr O C e S S O r Sp e e d

Processor speeds will determine how fast ﬁles will be processed through FastRIP. If your processor

is slow and the image is large and/or complex, it will take a long time for the job to be complet-

ed. Since most graphic intensive images qualify as large and complex, we recommend you have a

fast processor. Simply stated, ”e faster the processor speed, the quicker the ﬁle will print to the

printer.”

in S t a l l i n g in k Ca r t r i d g e S

When setting up your printer, make sure the FastINK cartridge is inserted into slot #5. If the

message ”Wrong Ink” displays on the Epson 4000 Control Panel, look at the white sticker on the

FastINK cartridge. e top line will start with”US....BLKD110U.” If there is not a ”U” at the

end of the product code, contact the Support Department to exchange the FastINK cartridge. If

you ﬁnd an Epson Matte Black cartridge in slot # 5 of the printer, contact the Support Depart-

ment to exchanged the cartridge for a FastINK cartridge that has a Matte Chip.

Fa S t rip prO PR I n t mo d e s - ep S O n 4000

FastRIP has a wide variety of output Print Mode functions, whether you want to print a full

color proof on inkjet paper, a T-Shirt Heat Transfer or a dense Black print on clear ﬁlm for

screen making.

General Film Output Print Modes `

FastRIP 720 SD - prints up to 65 LPI

FastRIP 1440 SD - prints up to 65 LPI