User`s manual

Chapter 9 - Print Modes and Printer Information
100
FastRIP 10.0 User’s Manual
ed I t I n g a PR I n t mo d e
From the 1. Printers menu, choose Manage Print Modes to open the Print Mode
Manager dialog.
From the drop-list, choose the printer model. e 2. Print Modes for that printer
will then be listed.
Click the 3. Print Mode, such that the name is highlighted.
Along the top of the 4. Print Mode Manager dialog, click the Edit Print Mode but-
ton.
e Properties dialog for the 5. Print Mode will open (see Queue Properties).
se t t I n g t h e de F a u l t PR I n t mo d e WI t h I n Fa s t RIP
If there is a Print Mode that you use most often, you can set this Print Mode as your printers
default Print Mode, saving you time in the future of having to select it each time you set up a
print.
From the 1. Queue menu, choose Properties.
On the 2. General tab, note the selected Printer.
In the following information box, set the queue to either 3. Protected or Unpro-
tected mode.
To the right of the 4. Print Mode drop-list, click the ellipsis button to open the
Print Mode Selection dialog.
Choose from the drop-list categories to narrow down the list of 5. Print Modes (i.e.,
what ink set, what resolution, etc.).
pr O t e C t e d Qu e u e mO d e
On the ` Queue tab, Protected mode causes all jobs received by that queue
to use the Print Mode that is set within that queue.
For example, if you have a specific media loaded into the printer, then `
you likewise know the precise Print Mode that should be used with that
media.
For a designer that does not know what media is being used, their choice `
of Print Mode will be ignored in favor of the Print Mode that you know
to be correct.