User`s manual

99
Version 1.1 Revised February, 2009
Chapter 9 - Print Modes and Printer Information
ch a n g I n g t h e PR I n t mo d e WI t h I n a he l d PR I n t jo B
Once a received job is held in a queue, the choice of Print Mode can be changed within the job
properties.
Right-click the job and 1.
choose Properties.
e 2. Job Ticket Proper-
ties dialog will open.
On the 3. General tab, note
the Print Mode field.
Next to the 4. Print Mode
field, click the ellipsis
button.
e available 5. Print
Modes are categorized
and named according to
media, print resolution,
ink density, halftone fre-
quency, and ink set.
You can also quick-select
these with the drop-down arrow.
NOTE: If in doubt concerning an appropriate Print Mode, then a small print test is recommended.
co P y I n g a PR I n t mo d e
If you would prefer to give custom descriptions or names to Print Modes to make it easier to
remember which Print Modes are for what, the following methods should be used.
From the 1. Printers menu, choose Manage Print Modes to open the Print Mode
Manager dialog.
From the drop-list, choose the printer model. e 2. Print Modes for that printer
will then be listed.
Click the 3. Print Mode, such that the name is highlighted.
Along the top of the 4. Print Mode Manager dialog, click the Copy Print Mode
button.
When prompted, type a meaningful name for the copy.5.