User`s manual

Chapter 8 - FastRIP Print Options
90
FastRIP 10.0 User’s Manual
al W a y S uS e tH e S e Se t t i n g S WH e n im p O r t i n g
is option will allow you to use the same im-
port settings for all file types.
If checked, the Image Import dialog will no
longer open every time you import an image.
In this case, to gain access to this dialog in the
future, go to Queue>>Properties>>Import Op-
tions tab.
Uncheck the “Hide Image Import dialog and
use the following settings” checkbox. is will
gray out the screen and allow you to make the
necessary settings each time you import an im-
age into FastRIP. You can also set a default in this window.
Fa s t aRtIst jo B s
Jobs from FastARTIST such as those created with the new Fluid Mask feature or PSD files
imported into FastARTIST will have there underbase created in FastARTIST, so you will not
see this dialog. But will have seen a similar dialog with the same options in FastARTIST when
importing the image.
ch a n g I n g th e PR I n t mo d e Fo R co l o R Pa s s e s
e Print Mode used for the color pass will be
set using the print mode selected in the queue
properties (Queue>>Properties>>General tab).
NOTE: You can change this for a particular job,
by going to the job properties (right click on job
and select properties).
If you want to setup a different default, then
click the drop-down selection arrow under Print
Mode. You can manually browse for a print
mode by clicking the button.
e new changes will then be used for all future
imports.
IMPORTANT: e Enable Underbase check-
box is for the Windows underbase setting only. Do not use this option for images with
transparency.