Operation Manual

9-14 Copier
B&W/Color button
This is used to set the output color (grayscale or color). Press the
B&W/Color button and the LCD panel display will change to the
B&W/Color setting. Press again to select the desired setting. After
you make a selection, the display will automatically return to its
previous state.
Copies button
This is used to set the number of copies. Press the “+” or “-”
Copies button and the number of copies displayed on the LCD
panel will begin to flash. Press the button again to change the
number of copies to a number from 1 to 20.
Note:
When making a Color copy with Quality set to Photo, the LCD panel
will display a message reading “Load Photo Paper”. When Quality is
set to Photo, we recommend using EPSON Photo Paper for best results.
Reduce/Enlarge button
This is used to set the enlargement/reduction ratio. Press the “+”
or “-” Reduce/Enlarge button and the Reduce/Enlarge setting
will be displayed on the LCD panel. Press again to select the
desired setting. After you make a selection, the display will
automatically return to its previous state.
The following ratios can be selected:
The initial setting is 100%.
200%, 141%, 120%, 100%, 93%, 80%, 70%, 50%