Operation Manual

Scanner 8-57
Output options:
If you select the check box for a specific point, such as 1/4
Tone or Midtone, you can move that point and it will remain
where you leave it; it will not be affected by the movement of
other points on the curve. If the check box is clear, the point
will be affected by the movement of other points.
Channels options:
You can select the combined red, green, and blue (RGB)
channel to modify all colors, or select these colors separately.
Note:
If Pixel Depth is set to Black & White or 8-bit Gray in the Image
Type dialog box, you can only select the combined RGB channel
option.
Tone correction list:
Select a tone correction setting from this list. The custom
settings you have saved appear in this list.
OK/Save/Delete/Cancel buttons:
To accept the defined Tone Correction or close the dialog box,
click OK.
After you correct tone, type a name for your custom settings
in the tone correction list and click Save.
To delete a setting, select the name of the setting you want to
delete in the tone correction list and click Delete.
To cancel the operation, click Cancel.
Color Adjustment