User`s guide

Printing with the StylusRIP Software
2-11
See your printer User’s Guide for more information about
Media Type and Print Quality settings.
4. Choose one of the settings for reporting
PostScript Errors
that might occur during printing.
5. Set the
Media/Resolution option corresponding to the
media you’re printing on and the resolution (print quality)
you want to use. (The
Printer’s default setting selects
Photo Quality Ink Jet Paper at 720 dpi.) See your printer
User’s Guide for more information about Media Type and
Print Quality settings.
6. Set the
Ink option to CMYK (Printer’s default) or
Grayscale.
7. Choose one of the following for the
Paper option setting
(for printers with a roll paper option only):
◗
Print Using Roll Feed Media
Make sure you choose this setting when you’re printing
on roll paper; otherwise, the printer will eject the entire
roll of paper.
◗
Print Using Cut Sheet Media (same as Printer’s
default)
Make sure you choose this setting when you’re printing
on single sheets of paper; otherwise, the top and
bottom edges of your image may be clipped.
8. Click
OK. When you return to the StylusRIP print dialog
box, click
Print.
The application sends the print job to the StylusRIP Server
software for processing and printing.
print.fm5 Page 11 Thursday, June 5, 1997 11:13 AM