User`s guide

Printing with the StylusRIP Software
2-10
Setting Print Options
The options at the top of the window are standard PostScript.
Those at the bottom of the window are specific to StylusRIP
and your EPSON Stylus printer. Follow these steps to set the
print options:
1. Choose the
Cover Page option you want.
2. Choose one of the following
Print settings:
◗ Black and White
◗ Color/Grayscale
◗ ColorSync Color Matching
◗ PostScript Color Matching
If you choose one of the color matching options, StylusRIP
matches the colors in your printout to the colors displayed
on your monitor as closely as possible. You must choose a
Printer Profile to use for matching in step 3.
Note:
If you don’t see the printer profiles listed, you may need to
install them manually. See page 1-10 for more information.
3. If you selected a color matching option in step 2, choose a
Printer Profile corresponding to the media you’re printing
on and the resolution (print quality) you want to use. The
available media types for each printer are as follows:
◗
Standard
(Photo Quality Ink Jet Paper at 720 dpi)
◗
360P_360 dpi Ink Jet Paper
◗
GF_Glossy Film
◗
GP_Glossy Paper
◗
PQP_Photo Quality Ink Jet Paper
print.fm5 Page 10 Thursday, June 5, 1997 11:13 AM