User`s guide

Printing with the StylusRIP Software
2-8
6. Drag the
StylusRIP Server Alias icon into the Startup
Items folder.
When you restart your system, the StylusRIP Server software
starts automatically. To cancel automatic startup of the
StylusRIP Server software, remove its alias icon from the
Startup Items folder and restart your Macintosh.
Printing from an Application
When you send a PostScript print job from your application to
the StylusRIP Server, it processes the PostScript file into a raster
image and prints it on your printer. If you send the job from a
client Macintosh on a network, the StylusRIP Client software
sends it to the print server Macintosh for processing.
Before printing from an application, make sure the StylusRIP
Server software is set up and running.
If you’re printing from a client system, you don’t need to have
the Stylus RIP software on your Macintosh. Just make sure
PSPrinter is selected in the Chooser before you print.
Setting Up the Print Job
Follow these steps:
1. Open your application and create your document.
2. Select
Page Setup from the File menu. You see a dialog
box containing the PSPrinter driver options you can select
to control printing, such as the
Paper Size.
3. Select the correct options for your document and click
OK
.
print.fm5 Page 8 Thursday, June 5, 1997 11:13 AM