User`s guide

2-1

Once you’ve installed the StylusRIP software in your

Macintosh computer(s) and printer, you need to set up your

server or standalone system so it’s ready to print. Then you can

start printing PostScript documents. Here’s what this chapter

covers:

◗ Setting up the StylusRIP Server software

◗ Starting the StylusRIP Server software

◗ Printing from an application

◗ Drag and drop printing

◗ Managing print jobs

Setting Up the StylusRIP Server

Follow the steps below to set up the StylusRIP Server software

the first time you use it. You need to do this for both standalone

and network configurations.

1. Turn on the printer and wait to make sure its

Power or

Operate light comes on and the light is not flashing.

(Check your printer documentation for details.)

2. Turn on the standalone or print server Macintosh.

Printing with the

StylusRIP

Software

print.fm5 Page 1 Thursday, June 5, 1997 11:13 AM