User`s guide

Printing a status sheet
While in Menu mode, you can print a status sheet to see the current default values. To print a
status sheet, follow the steps below.
1. Make sure that paper is loaded in the printer.
2. Press the Menu/Right r button to enter Menu mode.
3. Press the Paper Feed/Down d or Ink Cover Open/Up u button to display TEST PRINT, and
then press the Menu/Right r button.
4. Press the Paper Feed/Down d or Ink Cover Open/Up u button to display STATUS SHEET,
and then press the Menu/Right r button.
5. Press the Enter
button to start printing a status sheet.
After printing is finished, the printer exits Menu mode and returns to the READY status.
Maintenance Mode
Maintenance mode setting procedure
This section describes how to enter Maintenance mode and how to make settings with the buttons
on the control panel.
To make the Maintenance mode settings, follow the steps below.
Note:
Press the Back/Left l button to return to the previous step.
1. Enter Maintenance mode
Confirm the printer is turned off first. While pressing and holding the Cancel/Reset + button,
press the Power P button to turn on the printer.
2. Select an item
Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a desired item.
Epson Stylus Pro 3880 User’s Guide
The Control Panel 141