User`s guide

Button Description
5
Paper Feed/Down button d
Feeds the paper in forward direction.
When the paper is set, Auto Sheet Feeder and Manual-Front loads the
paper to the printing position automatically, and Manual-Rear back
feeds the paper.
Loads a sheet from the paper source to the printing position automatically.
Changes the parameters in forward order when selecting a desired
parameter in Menu mode.
6
Menu/Right button r
Enters Menu mode when pressed in the READY state. When pressed in
Menu mode, a desired menu can be selected.
Enters PRINTER STATUS menu if pressed during printing.
Cleans the print head if pressed and held for 3 seconds.
7Enter button
Sets the selected parameter in the selected item in Menu mode.
Executes the item if the selected item is for execution only.
Lights
This section describes the functions of the lights on the control panel.
The lights let you know the status of the printer and the type of an error when it occurs.
Light Description
8 Power light (green) On:
The printer is in the READY status.
Flashing:
The printer is printing.
The printer is cleaning the print head.
The printer is drying ink on the printed paper.
Off:
The printer is off.
9 Paper status light (orange)
On:
No paper is loaded in the paper source.
The loaded paper is too thick for head cleaning.
Flashing:
Paper is jammed.
Paper is not loaded straight.
Paper is not detected.
Cut sheet is not ejected correctly.
Epson Stylus Pro 3880 User’s Guide
The Control Panel 120