Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Paper Handling
40
D
Load the sheet into the paper insertion slot until
it meets resistance.
Align the right edge of the paper with the setting
position, and then insert the paper until it meets
resistance. When using paper sizes A4 or below,
set the paper until it reaches the bottom along
the line on the metal part under the paper
insertion slot.
PRESS THE BUTTON appears on the LCD
panel.
E
Press the button.
The paper moves to the start position.
F
If ARE THESE SETTINGS OK? appears on the
LCD panel, press the or button to select
NO and then press the button. Set the media
type and paper remaining, and then press the
button to set the media.
The previous setting appears on the LCD panel.
If the media type and paper remaining are
correct, select YES and then press the
button.
G
If you use the paper basket, set it backward
position.
See “Using the paper basket and paper
guides” on page 43
Loading cut sheet A3 size or
larger / thick paper
When you load a cut sheet media A3 or larger or thick
paper (0.5 to 1.5 mm), follow the steps below.
Setting direction of the paper is as indicated below.
A
Turn on the printer by pressing the button.
B
Press the button repeatedly until Sheet
appears.
C
Make sure that the roll paper cover is closed.
D
Press the button.
Note:
Load the sheet vertically, like most magazines.
Paper Direction
A3 or larger cut sheet (with
thickness of 0.5 mm or less)
Vertical
Thick paper with length of 728
mm or less
Vertical
Thick paper with length of 728
mm or longer
Horizontal