User`s guide

62
62 | Handling Paper and Other Media
3. Press the button. The printer automatically feeds the paper to the
cutter guide.
4. If necessary, adjust the cutting position by pressing the u or d Paper
Feed buttons.
5. Press the l Paper Source button until you see the roll (Auto Cut
On) icon on the LCD.
6. Press and hold the button for 3 seconds. The paper is cut.
Printing Trim Lines
You can print trim lines on the right edge of your pages (Auto Cut On) or
on the right and bottom edge (Auto Cut Off).
1. Press the
Menu button.
2. Press the
Menu button again to select the Printer Setup menu and
highlight
PLATEN GAP.
3. Press the d button to highlight
PAGE LINE.
4. Press the
Menu button.
5. Press the d or u button to highlight
ON.
6. Press the button to save the setting. An asterisk appears next to
ON.
7. Press the Pause button to exit the menu.
You can also specify trim lines from your printer driver software. For
instructions, see page 89 (Mac OS X) or page 106 (Windows).