User`s guide

58 | Handling Paper and Other Media

Placing the Paper in the Printer

1. Open the roll paper cover.

2. Place the roll paper in the roll holder as shown. (The black end of the

spindle goes on the left.)

3. Make sure the printer is turned on, then press the l Paper Source

button until the (Auto Cut Off) or (Auto Cut On) icon

appears on the LCD display.

4. Make sure the P Power light is not flashing, then release the paper lever.

Caution: To avoid

feeding excess paper,

make sure you don’t

select

when you’re

using roll paper.

Caution: Do not release

the paper lever while the

P Power light is flashing,

or you may damage the

printer.