User`s guide

56 | Handling Paper and Other Media

•

Choose if you want the paper to be cut automatically after each

page is printed.

• Do not leave roll paper loaded in the printer when it is not in use.

• Choose if you want to print a series of pages and keep them together

for cutting later on.

• Choose if you’re printing on canvas or other heavy media. Media

that is too thick may damage the cutter. Use of Epson’s optional Manual

Media Cutting System is recommended. See page 12 for more

information.

The following media (and other similar materials) may not work with

the built-in cutter:

• Fine art paper (including Epson Textured and UltraSmooth

Fine

Art Paper)

• PremierArt

Water Resistant Canvas for Epson

• Vinyl

• Matte board

• Backlight film

• Heavyweight polyester banner media

• DuPont

Semigloss Proofing Paper

• If you’re loading heavy paper, you may need to increase the paper

suction by pressing the u Paper Feed button. For lightweight paper,

decrease the suction by pressing the d Paper Feed button. (Release the

paper lever to adjust the suction, then secure it again.)