User`s guide

41
Setting Up the Printer | 41
4. Install the ink cartridges in the printer.
Hold each cartridge with the arrow pointing toward the printer, then
insert it into its slot. Make sure you insert each cartridge all the way into
the correct slot and that you see the corresponding ink cartridge icon on
the LCD display.
5. After installing all 8 cartridges, lower the ink levers. The printer begins
charging the ink delivery system and the P Power
light flashes.
6. When messages appear on the LCD display, follow the instructions to
raise or lower the ink levers, and to close the ink compartment covers.
Charging is finished when the P Power
light stays lit green and the
PAPER OUT message appears.
After ink charging is completed, you need to load paper before
READY will
appear on the display. See page 45 for instructions.
Caution: Charging takes
about 12 minutes. Never
turn off the printer,
release the paper lever, or
open the front cover while
the
P Power light is
flashing, or you may
damage the printer.