User`s guide

206
206 | Control Panel Summary
Menu Setting Summary
Press the Menu button to enter menu mode and select the settings
summarized here.
Menu setting Description
PRINTER SETUP menu
ROLL PAPER COUNTER Alerts you when roll paper is running low. Set the
paper length and at what remaining length you
want to be alerted. (To use, first select ROLL as
the REMAINING PPR SETUP setting in
Maintenance mode; see page 149.)
PLATEN GAP Adjusts the distance from the print head to the
paper; see page 68 for details.
STANDARD for most printing
WIDE or WIDER if images are smeared
NARROW for thin paper
WIDEST for thick paper
PAGE LINE Selects whether to print a cut off line between
pages on roll paper; see page 62 for details.
INTERFACE Selects an interface for receiving print jobs.
AUTO to automatically select the interface when
it receives a print job
USB to receive only print jobs sent to the USB
interface
NETWORK to receive only print jobs sent to the
network interface
CODE PAGE Selects the code page for your data
PC437 for extended graphics data codes
PC850 for multilingual data codes
ROLL PAPER MARGIN Selects the margins for roll papers.
DEFAULT (15 mm all around)
TOP/BOTTOM 15 mm (3 mm left/right)
TOP 35/BOTTOM 15 mm (3 mm left/right)
3 mm (all around)
15 mm (all around)
PAPER SIZE CHECK Selects whether the printer checks to see if the
width of the loaded paper matches the width
selected in your print job (ON is recommended).