User`s guide

167
Solving Problems | 167
MAINT TANK FULL
REPLACE THE
MAINTENANCE TANK
The maintenance tank is full. Replace the maintenance tank. For the
Pro 9880, note which tank is full; see page 154.
MISMATCH ERROR
MAKE SURE THAT THE
INK CARTRIDGE AND
DRIVER SETTINGS
MATCH
The black ink cartridge option
does not match what is
selected in the driver
Stop printing, and then press and hold the
Pause button for 3 seconds. Select the
correct black ink cartridge option in the driver;
see page 148. If you want to continue printing,
press the Pause button.
A non-Epson ink cartridge is
installed.
Press and hold the Pause button for
3 seconds to cancel printing. If you want to
continue printing, press the Pause button.
NO CARTRIDGE
INSTALL INK CARTRIDGE
Ink cartridge(s) not installed. Install ink cartridge(s); see page 141.
NO MAINTENANCE TANK
INSTALL THE
MAINTENANCE TANK
Maintenance tank is not
installed.
Make sure the maintenance tank is fully
inserted. For the Pro 9880, note which tank is
missing; see page 154.
PAPER CUT ERROR
REMOVE UNCUT PAPER
Roll paper was not cut
correctly.
Release the paper lever and finish cutting the
paper. Reload paper if necessary.
The cutter may be blunt or
incorrectly installed.
Reinstall or replace the cutter blade if
necessary; see page 151.
PAPER EJECT ERROR
REMOVE PAPER FROM
PRINTER
Paper remains in the printer. Release the paper lever and remove the paper.
PAPER ERROR
LOAD PAPER PROPERLY
Printer cannot detect paper. If you are using cut sheets, make sure the
paper is flat. If you are using roll paper, make
sure the roll is cut evenly.
Release the paper lever and reload paper.
PAPER LOW The paper roll is almost
finished.
Replace the roll paper.
PAPER JAM
REMOVE PAPER
Paper has jammed in the
printer.
Release the paper lever and remove the
jammed paper. Turn the printer off and then
back on; see page 176 for more information.
PAPER OUT
LOAD PAPER
Paper ran out. Load paper.
PAPER SETTING ERROR
LOAD CUT SHEET PAPER
The paper path is wrong. Load cut sheet paper, as described on page 63.
Press the l Paper Source button until the
Sheet icon appears on the LCD display.
Message Explanation Response