User`s guide

164
164 | Solving Problems
Checking Error Messages and Lights
The control panel includes various lights and an LCD display to indicate the
status of the printer:
When your paper runs out, ink is low, or a problem occurs, a message
appears on the LCD display, and the lights on the control panel come on or
flash. The following table lists the messages in alphabetical order and
includes an explanation and instructions for correcting the problem.
LCD display
Power
button and
light
Pause or reset
button and light
Ink
light
Left arrow or Paper
Source button
Paper
light
Menu or
cleaning
button
Paper Feed up button
Paper Feed down butto
n
Enter or cut
button
Message Explanation Response
BORDERLESS ERROR
LOAD CORRECT SIZE
PAPER
The borderless setting is
selected and paper that doesn’t
support borderless printing is
loaded.
Change the setting in the printer driver or load
different paper.
CARRIAGE LOCKED
RELEASE THE CARRIAGE
LOCK
The print head is locked. Remove the bracket securing the print head;
see page 35.
CLEANING ERROR
PRESS PAUSE BUTTON
Head cleaning did not clear the
nozzles.
Run the head cleaning utility again. If the
nozzles are still clogged, contact Epson.
CLEANING ERROR
REMOVE THICK PAPER
Paper is too thick for head
cleaning.
Release the paper lever to remove the paper.
Head cleaning starts automatically. After
cleaning, reload paper.
Printer could not feed the
printed page.
Remove the print.