User`s guide

154
154 | Maintaining and Transporting the Printer
2. Push down on the side pin while turning the latch to the left.
3. Close the front cover when you see a message prompting you to do so.
The cutter moves to the home position and
READY appears on the
LCD display.
Replacing the Maintenance Tank
The maintenance tank stores ink that gets flushed from the system during
the initial ink charge and manual and automatic print head cleaning. When
the tank is almost full, the message
MAINTENANCE TANK NEAR FULL
appears on the LCD display. When the tank is completely full, the printer
stops working and
MAINTENANCE TANK FULL appears on the LCD.
You can check how much space remains in the maintenance tank by viewing
its icon on the control panel, shown below. You can also check its status
using the menus (see page 132), using your printer software (see page 134),
or by printing a nozzle check sheet (see page 137).
Maintenance tank icon
(2 tank icons appear
on the Pro 9880 LCD
display)