User`s guide

140
140 | Maintaining and Transporting the Printer
9. When the uni-directional alignment is finished, press d until BI-D
2-COLOR
is highlighted. Then press to start the bi-directional black
alignment process.
10. When the bi-directional black alignment is finished, press d until
BI-D
ALL
is highlighted. Then press to start the alignment process.
11. When done, press the Pause button to exit head alignment mode.
If you want to fine-tune the automatic alignment process, you can perform a
manual head alignment; see the next section.
Manually Aligning the Print Head
1. Make sure the printer is turned on. Then load Epson Enhanced Matte
paper or the paper that came with the printer.
2. Press the
Menu button.
3. Press the
d button until HEAD ALIGNMENT is highlighted, then press
Menu. PAPER THICKNESS is highlighted.
4. Press
Menu. The STANDARD setting is selected by default. This is the
correct thickness setting for most Epson papers.
5. Press to save the setting.
6. Press l, then press d to highlight
ALIGNMENT.
7. Press the
Menu button to highlight MANUAL, then press Menu again.
8. Press d to highlight
BI-D 2-COLOR, then press to start printing the
alignment patterns.
Tip: To properly align the
print head, you can also
use Epson Doubleweight
Matte Paper or Ultra
Premium Photo Paper
Luster.
VLm
123456 789
Lc
123456 789