Operation Manual

Maintenance and Transportation 274
Transporting the Printer
Over a long distance
If you need to transport your printer over a long distance, repack
the printer using the original box and packing materials.
To repack the printer, follow the steps below.
c
Caution:
Keep the printer horizontal when transporting it. Do not tilt or
vibrate the printer; otherwise ink may leak from the ink cartridges
or maintenance tank.
1. First turn off the printer and make sure the print heads are in
the home (far right) position. If not, turn the printer back on,
wait until the print heads move to the home position, then
turn off the printer.
2. Remove the following parts.
❏ Power cord
❏ Interface cable
❏ Paper basket
❏ Roll paper spindle
❏ Roll and cut sheet media
❏ Optional Auto Take-Up Reel Unit (if installed)
❏ Optional Manual Cutter Unit (if installed)