Operation Manual

Paper Handling 218

Winding paper forward

When you want paper wound onto the take-up reel core with the

print on the outside, set the take-up reel unit to wind paper

forward. Follow the steps below.

1. Attach the three paper guides packaged with the Auto

Take-up Reel Unit, taking care to space them evenly.

2. Make sure that the roll paper is loaded in the printer properly.

For instructions, see “Loading roll paper” on page 206.

3. Press the Paper Source l button to select Roll Auto Cut Off

Press the Paper Feed d button on the printer to advance the

roll paper.