Installation Instructions

8
c
Caution:
❏ Watch your fingers when opening and
closing the front cover.
❏ Be careful not to touch the parts
highlighted below; otherwise, the
printer may be damaged.
Note:
Do not re-install the screw and the metal plate.
Store them separately to avoid losing them.
8. Close the front cover.
Attaching the Paper Basket
1. Fully insert and attach the upper basket hooks
(D) to the upper guides of the base upright left
and right.
2. Turning the stitch side downward, spread the
paper basket on the floor.
3. Holding the rear shaft, pass it under the
horizontal struts.
L: Protective screw
M: Protective metal plate
N: Red wire
L
M
N
D