Operation Manual

E
Load the sheet into the paper insertion slot.
F
Make sure that the right and bottom edges of
the sheet are straight and in line with the set line.
If you have difficulty adjusting the thick paper,
adjust the paper suction by pressing the or
button.
G
Press the button.
After a few seconds, the paper moves to the
start position. If you press the
button, it
moves at once.
H
If ARE THESE SETTINGS OK? appears on the
LCD panel, press the
or button to select
NO and then press the
button. Set the
media type and paper remaining, and then
press the
button to set the media.
The previous setting appears on the LCD panel.
If the media type and paper remaining are
correct, select YES and then press the
button.
I
If you use the paper basket, set it in the forward
position.
See “Using the paper basket and paper
guides” on page 40
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide
Paper Handling
38