Operation Manual

1-10

Setting up the Printer with Your Computer

R4C6020

Rev. 1

A5 size SETUP.FM

7/12/01 Pass 3

Proof Sign-off:

DAI A. Kobayashi K. Araki

K. Nishi

DAI K. Ramsey

5. Windows 95 and NT users should proceed to step 6.

For Windows 98 users, follow the on-screen instructions to

turn on your printer. The printer port configuration starts

automatically.

For printers connected via USB cable, the USB device driver

installation starts automatically at this point.

6. When a message appears informing you that installation is

complete, click OK.

Note:

If an error message appears, either the printer driver or the EPSON

USB printer device driver is not installed correctly. See

“Troubleshooting” in the Online Guide.

For information on opening and using the printer software, see

“Printing from Your PC” on page 2-14. If you use your printer on

a network, see “Setting up Your Printer on a Network” on page

1-14.

Ensuring that the USB driver is installed correctly in Windows

(for Windows 98 and Me only)

After the printer software installation is complete, confirm that

the USB driver is installed correctly.

1. Click the Start button, point to Settings, and click Printers.

Make sure that the icon for your printer appears in the Printers

window.