Operation Manual

Setting up the Printer with Your Computer

1-7

R4C6020

Rev. 1

A5 size SETUP.FM

7/12/01 Pass 3

Proof Sign-off:

DAI A. Kobayashi K. Araki

K. Nishi

DAI K. Ramsey

8. Connect a compatible interface cable to the interface card and

to your computer. If the cable has a ground wire, secure it with

one of the screws.

Also, if you are using more than one computer, reconnect the

other interface cable.

9. Make sure the printer is turned off. Then plug in the power

cord.

Now see “Installing the Printer Software” on page 1-8 and

“Setting up Your Printer on a Network” on page 1-14.

To remove an interface card, follow the above steps in reverse

order.