Operation Manual

Setting up the Printer with Your Computer

1-5

R4C6020

Rev. 1

A5 size SETUP.FM

7/12/01 Pass 3

Proof Sign-off:

DAI A. Kobayashi K. Araki

K. Nishi

DAI K. Ramsey

Using an optional interface card

Available optional interface cards

The optional Ethernet Interface Cards listed below let you use

your printer on a network. The Ethernet card automatically

detects the protocols on your network, so you can print from

Windows 95, 98, Me, NT 4.0, and Windows 2000; and Macintosh

on an AppleTalk network.

Note:

The asterisk in the product number is a substitute for the last digit, which

varies by country.

Installing the optional interface card

To install an optional interface card, follow these steps:

Note:

Before you install the optional interface card, see the documentation that

comes with the card for setup information.

1. Make sure the printer is turned off.

2. Make sure that the power cord is unplugged from the

electrical outlet.

Warning:

Do not install the interface card when the printer is

connected to an electrical outlet. Doing so may damage the

printer.

3. Disconnect the interface cable, if necessary.

Type B Ethernet Interface Card (10BASE-T)

Type B Ethernet Interface Card (100BASE-TX)

IEEE 1394 Interface Card

C82362✽

C82363✽

C82372✽