Specifications

Epson Stylus Pro 4880
6 12/07
SET PAPER LEVER Paper light on Paper lever was released during the
printing process or another operation.
Pull the lever all the way forward, to the secured
position. Start printing again from the beginning for
best results.
TIMES REMAINING — The conversion cartridge needs to be
replaced soon. (The remaining
number of times you can use the
conversion cartridge appears on the
LCD.)
You need to replace the conversion cartridge soon.
Press the pause button.
TOP COVER OPEN — Top cover is open. Close the top cover.
UNABLE TO PRINT — An error may be occurring when you
try to print a nozzle check or align the
print head.
Press the pause button to exit the Test Print menu;
then resolve the problem. If the message appears
again, clear the error before you print.
UNLOCK PRINT HEAD Print head is locked. Remove the protective materials and pull the green
tab on the left side of the print head to release the
print head.
UPDATE FAILED The printer failed to update the
firmware.
Update the firmware again.
WRONG INK CRTG B Ink light on You tried to install the wrong ink
cartridge.
If you are installing ink cartridges for the first time, you
must install the cartridges that came with your printer.
If you are replacing ink cartridges, check the package
and product code to make sure you have the correct
cartridge. Replace the cartridges with genuine Epson
ink cartridges.
WRONG PAPER SIZE Paper light
flashing
Loaded paper does not match the
image size.
Make sure the size you selected in the printer driver
matches the loaded paper size. Load the correct size
paper if necessary.
Message/Light Light Explanation Response