Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Print Head Replacement Printer Component, Software Item, LCD Display, Printer Button Page 99.
22. Loosen the 6 Nuts shown below, and separate the Plastic Ink Tubes from the Plastic Fittings.
23.
The Print Head is filled with Ink. It is important to keep the Print Head Nose and the Ink Tubes at their
current level (angle) while removing the Print Head.
24. Remove the Print Head.
24.1 Place paper towels in the waste basket.
24.2 Pour the ink in the Print Head into the paper towels in the waste basket.
24.3 Place the Print Head in a water tight baggie, and set aside.
Six Nuts