Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Print Head Replacement Printer Component, Software Item, LCD Display, Printer Button Page 94.
9. Move the Print Head to the center of the Printer.
10. Remove the Print Head Cover by removing the two Screws as shown below.
11. Remove the Print Head Weight.
11.1 Move the Print Head to the far left side of the Carriage Rail.
11.2 Remove the 4 Screws pictured below.
Left Side
Screw
Right Side
Screw
View from below
Remove 4 screws
Weights and screws
2 long screws go
here