Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Paper Thickness Sensor Actuator Repair Printer Component, Software Item, LCD Display, Printer Button Page 91.
Paper Thickness Sensor Actuator Repair
1. Remove the Screw and the Actuator pictured below.
2. Installation requires rotation of the “hockey stick” end to finesse the “end” through the paper path.
Screw
Pull the Actuator Bracket down and out,
in the direction of the arrow. The device
should be rotated 90 degrees to free
the “hockey stick” end.
Actuator and Screw