Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Paper Loading Errors (Roll) Printer Component, Software Item, LCD Display, Printer Button Page 88.
7.1.4 Press the Enter button.
7.1.5 Press the Paper Source button until the LCD Displays Sen: RearAD.
7.1.1 Press the Paper Source button until the LCD Displays Sen: FrontAD.
Place a piece of paper in
the paper path on the right
side of the Printer.
Watch the 6 digits on the right side of the Control Panel LCD.
Remove the piece of paper, and look for a significant change in
the 6 digits on the right side of the display.
Place a piece of paper over the
paper sensor located on the bot-
tom, right side of the paper path.
Watch the 6 digits on the right side of the Control Panel
LCD. Remove the piece of paper, and look for a significant
change in the 6 digits.