Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Paper Loading Errors (Roll) Printer Component, Software Item, LCD Display, Printer Button Page 87.
5. Clean the Timing Strip.
5.1 Gently wipe the Timing Strip on both sides with a lightly moistened soft cloth.
Do not apply pressure, the Timing Strip scratches easily.
Do not pull the Timing Strip off of it’s Mounting Brackets.
6. Verify that there is not strong direct light shining on either Paper Sensor.
7. Verify that the Paper Sensors work.
7.1 Turn on the Printer while holding the Paper Feed +, Paper Feed -, and the Cut/Eject buttons.
7.1.1 The LCD will display Check:Test.
7.1.2 Press the Enter button.
7.1.3 Press the Paper Source button until the LCD displays Test: Sensor.
Open the Front Cover, and look up.
Metal Brackets
Timing Strip
The Timing Strip is a long plastic strip that is sup-
ported by multiple metal brackets.