Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Paper Loading Errors (Roll) Printer Component, Software Item, LCD Display, Printer Button Page 86.
2.7 If the Driver is set to Roll and the Printer’s Control Panel is set to Sheet (or vice versa).
3. Verify that the media is loaded correctly.
4. Blow the dust off of 2 Paper Sensors.
Verify that the Media is mounted on the Spindle
so that it feeds from the front of the Spindle.
Verify that the alignment marks are being
used as shown, when loading paper.
Right edge marks
Verify that the light colored Spindle Edge is on the
right side of the Printer.
Leading edge
marks
Insert a piece of paper, and bend it
forward. Look down through the
top right side of the Printer where
the paper is inserted.
Look on the left side of the
Print Head Mechanism.