Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Operational Sequences Printer Component, Software Item, LCD Display, Printer Button Page 81.
Operational Sequences
Compare the Printers operation to the following sequences.
1.
2.
Technician Action What You Should See
Turn on power, no paper
loaded, and the Paper
Release Lever in the
“Secured” position.
Note: the following
sequence and the
sequence to the
right, occur
simultaneously.
Any failure of one
sequence is
reported after
completion of both
sequences
1. The Air valve Solenoid
closes.
2. The Air Compressor
pressurizes the Ink Car-
tridges.
3. The Air Pressure Sen-
sor detects 1.1 atmo-
spheres of pressure.
4. The Compressor Motor
turns off.
1. The Cap Assembly drops to release the Print Head.
2. The Shutter Box initializes and finds it’s home posi-
tion.
3. The Paper Release Solenoid locks the Paper
Release Lever.
4. The Print Head goes to it’s home position.
5. The Platen Gap Mechanism finds it’s home position.
6. The Print Head moves away from home position.
7. The Wiper Blades clean themselves.
8. The Print Head moves back to it’s home position.
9. The platen gap is set.
10.The Cap Assembly engages and cleans the Print
Head.
11. The Flushing Box Fan turns on.
12. The Printer performs an Auto nozzle check.
13. The Platen Gap is set.
14. The Paper Release Solenoid unlocks the Paper
Release Lever.
16. The Printer displays the Paper Out Light.