Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
New Print Head for DYE Printers Printer Component, Software Item, LCD Display, Printer Button Page 80.
New Print Head for DYE Printers
A new Print Head and a new part number is available to address the issues listed below. The new Print Head is for
DYE model Stylus Pro 10600 inkjet printers ONLY.
• One or more nozzles fail.
• Horizontal banding caused by nozzle issues.
• One or more colors completely missing.
• Service Request 0001001B, Head Driver Temperature error.
Interchangeability:
For the Archival model of this printer continue using the original print head part number (F086030) until this inventory
is depleted. When the inventory of the original print head is depleted the New Style print head part number (F086031)
will automatically be substituted.
Updated Print Head Part Numbers:
Note:
Stylus Pro 10600 DYE Model - Inventory of the New Style print head will be available as of
5/8/03.
Continue using existing Print Head until then.
Stylus Pro 10600 Print Head is not compatible or interchangeable with Stylus Pro 10000 Print Head. DO
NOT substitute these parts.
Field Instructions:
Perform nozzle checks and cleaning’s when ever a nozzle issue is observed to recover the Print Head. Only when
standard nozzle recovery procedures fail to recover nozzle issues should the Print Head be replaced.
New Part Number Part Description Replaces Part Number
Stylus Pro 10600: F086031 Print Head Set ARC/DYE/
UCM
F086030