Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Image Quality Diagnosis and Repair Printer Component, Software Item, LCD Display, Printer Button Page 72.
3.3.1 Inspect Thickness Sensor Actuator for proper position.
3.3.2 Adjust if required.
4. Perform the Head Angular Adjustment.
5. Perform the Bi-directional Adjustment.
6. Perform the Head LR Adjustment.
Un-sharp: Caused by to much dot gain: (See Vertical Banding Irregular)
Smear: typically caused by one or more of the following reasons.
1. Slow dry time caused by 3
rd
party media.
1.1 Try with the Epson supplied media, image and driver.
2. Slow dry time caused by 3
rd
party ink.
3. Slow dry time caused by over saturated media.
3.1 Try with the Epson supplied media, image and driver.
Debris:
1. Clean the edges (metal) of the Print Head (DO NOT touch Print Head nozzle area).
2. Clean the 3 Caps, Wiper Blades, and Wiper Cleaners.
Note: Look for fibers from cotton or rag based media, attracted to the Print Head and saturated with ink.
It collects and drops onto the media.