Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Epson Pro Graphics 24” Test Print Directions Printer Component, Software Item, LCD Display, Printer Button Page 47.
Epson Pro Graphics 24” Test Print Directions
The Purpose of the Test Print File:
The 24” Test Print File is designed to provide a “Standard” test print to evaluate the operation of an Epson Printer
in relation to it’s expected performance.
About the Test Print File:
1. The Test Print file was created in Quark Xpress 4.11r0 on a PC. All Quark elements are RGB. All
Image files are RGB Tiff at 100%. No files were scaled or rotated. The file was distilled with
Acrobat 5.05 to create the final PDF file.
2. This Test Print is not intended for use with CMYK PostScript workflows: EPSON Fiery RIPS or
3rd Party RIPS. Use of anything other than the standard EPSON Driver will yield undetermined
results.
Before Printing the Test Print File:
1. Verify that Acrobat Reader 5.0 or above is installed on the Computer.
1.1 Acrobat Reader 5.0 is available free from WWW.Adobe.com.
2. Verify that the latest Printer Driver is installed.
2.1 Please check the Epson Web site for the current driver specific to your model and Operating System.
2.1.1 WWW.Epson.com
3. Verify that all the Printer’s Nozzles are performing correctly.
3.1 Run a Nozzle Check test print from the Utility Tab of the Printer Driver.