Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Driver Board Replacement Printer Component, Software Item, LCD Display, Printer Button Page 45.
8.1 Enter Maintenance Mode 2.
8.2 Turn on Printer while depressing (Paper source) + (Cut/ Eject) + (Paper Feed -).
8.3 Press SelecType 2 times to display the Clear Counters Menu.
8.4 Press Paper Source one time to display RTCINIT = YY / MM / DD/ HH.
8.5 Enter the current Year, Month, Day, and Hour.
8.5.1 The Cleaning button shifts between year, month, day and hour.
8.5.2 The Paper feed + or Paper feed - buttons change the values.
9. Download previously uploaded parameters.
9.1 Unplug Printer.
9.2 Insert the “Parameter” flash card (Part # 1070167SP10K).
9.3 Plug in the Printer.
9.4 Turn on the Printer and press any key. The download will be performed.
9.1 Unplug Printer.
9.2 Remove the “Parameter” flash card
10. Load Paper.
10.1 If the paper does not load properly:
10.1.1 Adjust the Paper Sensor Trim Potentiometers.
10.1.1.1 Turn VR1 - VR6 clockwise 1/4 turn and load the paper again.
10.1.1.2 Repeat if necessary.
11. Print the adjustment patterns.
11.1 Enter Self Diagnostic Mode.
11.1.1 Turn on the Printer while depressing Paper Feed + + Paper Feed - + Enter.
11.2 Press the SelecType button to display Check: Adjustment.