Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Driver Board Replacement Printer Component, Software Item, LCD Display, Printer Button Page 44.
4. Install the vertically mounted Sub-Board Assembly
5. Erase the exsisting firmware on the Driver Board.
5.1 Insert the “All Erase” flash card (Part # 1070167ER10K)
5.2 Plug in Printer.
5.3 Turn on the Printer and do not press any key. The erase function will be performed.
5.1 Unplug Printer.
5.2 Remove the “All Erase” flash card
6. Install firmware to replace the erased firmware using the firmware flash card
6.3 Insert the “Firmware” flash card (Part # 1070167FM16K)
6.4 Plug in Printer.
6.5 Turn on the Printer and do not press any key. The firmware up load function will be performed.
6.1 Unplug Printer.
6.2 Remove the “Firmware” flash card
7. Download latest firmware.
7.1 Connect the Printer to your PC with a parallel cable.
7.2 Prepare your computer to send the correct firmware file to the Printer.
7.2.1 Use the DOS copy command or WinPRN.exe.
7.2.1.1 See the DOS Copy for Firmware section of the Field Repair Guide.
7.2.1.2 See the WinPrn Utility Section of the Field Repair Guide.
7.3 Turn on Printer while depressing the (Paper Source) + (Cut Eject) + (Cleaning) buttons.
7.4 Send the firmware to the Printer.
8. Initialize the RTC (Real Time Clock).