Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Carriage Mechanism Replacement Printer Component, Software Item, LCD Display, Printer Button Page 38.
43.9 Repeat steps 43.7 and 43.8 until the lines are as linear as possible. It might be necessary to change the Bi-
d adjustment variable and the A13 adjustment to achieve the best results.
44. Perform the PF Slant Adjustment using the Bi d, V1, 240,K alignment pattern for reference.
44.1 Enter Self Diagnostic Mode.
44.1.1 Turn on the Printer while depressing Paper Feed + + Paper Feed - + Enter.
44.2 Press the SelecType button to display Check: Adjustment.
44.3 Press the Enter button time to display Adj: Check Skew.
44.4 Press the SelecType button to display Adj: Top + Bottom.
44.5 Press the Enter button to print the adjustment pattern.
44.6 Measure the printed pattern and input the data when prompted by the Printer.
45. Check all electronic and mechanical alignments.