Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Carriage Mechanism Replacement Printer Component, Software Item, LCD Display, Printer Button Page 35.
39. Install the Print Head Weights.
39.1 Move the Print Head to the far left side of the Carriage Rail.
39.2 Install the left side of the Weights first, and leave loose until the right side Weights are installed.
40. Perform cleaning cycles and nozzle checks, until the Print Head’s nozzles recover.
41. Perform the A13 Slant adjustment.
41.1 Enter Self Diagnostic Mode.
41.1.1 Turn on the Printer while depressing Paper Feed + + Paper Feed - + Enter.
41.2 Press the SelecType button to display Check: Adjustment.
41.3 Press the Enter button time to display Adj: Check Skew.
41.4 Press the SelecType button to display Adj: A13 Slant.
Top Weights
2 long Screws
Carriage Frame
Bottom Weights
View from the floor, looking up.