Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Carriage Mechanism Replacement Printer Component, Software Item, LCD Display, Printer Button Page 34.
37. Install the Print Head Fastening Brackets, tighten and back off 1/4 turn.
38. Route and install the Sensor/Solenoid Cables, and the Ground Wire.
Install the left and right Silver Spring
Brackets (Do not fully tighten).
Install the left and right Black Plas-
tic Brackets (Do not fully tighten).
Screw the Print Head to the Black Plas-
tic Brackets (Do not fully tighten).