Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Carriage Mechanism Replacement Printer Component, Software Item, LCD Display, Printer Button Page 29.
29. Attach the Carriage Belt to both sides of the Carriage.
29.1 Route the Carriage Belt around the Belt Roller, through the loop on the bottom of the Carriage Rail, and
attach to the left side of the Carriage.
29.2 Carefully move the right side of the Carriage Belt until it can be attached to the right side of the Carriage.
Screw and Belt go
Around the Roller and
through this loop.