Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Carriage Mechanism Replacement Printer Component, Software Item, LCD Display, Printer Button Page 19.
19. Disconnect the Carriage Belt from the Carriage Assembly.
19.1 Mark the Carriage Belt Tension Screws to record the current position, and turn the Screws to release the
Carriage Belt tension.
20. Disconnect the Carriage Belt by removing the 2 hex/allen Screws (2.5mm).
Mark the Screws
Release the tension on
the Belt by loosening
the Screws.
Left Side hex/allen Screw
(2.5mm)
Right Side hex/allen
Screw (2.5mm)
Right Side Belt, and Fastener