Service manual
Stylus Pro 10600 Field Repair Guide 7/29/04
Carriage Mechanism Replacement Printer Component, Software Item, LCD Display, Printer Button Page 12.
10. Remove the Print Head Cover by removing the two Screws as shown below.
11. Remove the Print Head Weights.
11.1 Move the Print Head to the far left side of the Carriage Rail.
11.2 Remove the 4 Screws pictured below.
Left side
Screw
Right side
Screw
View from below
Remove 4 Screws
Weights and Screws
2 long Screws
go here
This picture is reversed
from the one on the left.