Service manual

Stylus Pro 10600 Field Repair Guide 7/29/04
Waste Ink Maintenance (Service Request 00000100) Printer Component, Software Item, LCD Display, Printer Button Page 108.
Waste Ink Maintenance (Service Request 00000100)
The Service Request 00000100 error message indicates that the Waste Ink Tank is full, and the Pads must be
replaced. Additionally, the related counters must be reset.
1. Replace the Waste Ink Pads.
2. Reset the related Counters.
2.1 Enter Maintenance mode2. Paper Source, PF-, Cut/Eject + Power On.
2.2 Press SelecType until CLEAR COUNTERS is displayed then press Enter.
2.3 Press Paper Source/Item until INIT. CLEANER=EXEC. is displayed then press Enter.
2.4 Press Paper Source/Item until INIT. WA. INK=EXEC. is displayed then press Enter
2.5 Press Paper Source/Item until INIT. Flushing Box=EXEC. is displayed then press Enter.
2.6 When completed turn the printer OFF and back ON normally.